Cicada

4 posts / 0 new
Last post
#1 Sun, 01/06/2013 - 18:29
Cynfire's picture
Offline
Last seen: 7 years 2 months ago
Joined: 10/20/2012 - 12:13

Cicada

Well I have conquered the Catapult and the Raven. I am looking for a new toy. I got myself the ECM Cicada. I like it. 3 Pulse lasers, ECM, largest engine, and max armor. Fun. What are the best out of the other Cicada's? Want to level 3M to max don't really want to pump in the MC to transfer the XP. The 6 energy chassis looked good. What about the 4 Ballistic Chassis??

I don't think I could suffer an assault mech, and I have tried the other heavy's. My issue is aim. I suck! So torso weapons and streaks are going to be my thing.

 

Any help would be appreciated.

 

~Cyn

Sun, 01/06/2013 - 20:36
ferretgr's picture
Offline
Last seen: 5 years 1 week ago
Joined: 05/24/2011 - 23:00

NOT THE 4 BALLISTIC!

I'll post some good builds for the rest in a bit :)

Sun, 01/06/2013 - 21:17
ferretgr's picture
Offline
Last seen: 5 years 1 week ago
Joined: 05/24/2011 - 23:00

Okay. First off, learn to like lasers if you're gonna do Cicadas, you'll have a much better time! I also believe you're better off with the non-pulse versions: I don't think the heat or mass tradeoff is worth it.

Given your predilection for torso-based, your favorite Cicada outside of the 3M will be the 2A: here's the build I use:

 

CDA-2A

5 ML: 2 in the left, 2 in the right, 1 center

TAG CT

DHS, Endo-steel

300 XL, 2 engine HS, 6 additional doubles

272/274 armor - I put 14/18/14 on the rear torsos because you're gonna get backshot when you're circling

Nice and fast... 121.5 before speed boost I think. There's a possible AMS if you feel the need... you could lose 1 ML and a few points of armor for an AMS and a ton of ammo, but I like the extra armor and damage output, and you're fast enough to disengage if you get in trouble with missiles.

 

As an aside, I have a fun 2B build too; don't sell it short because of the arm-mounted lasers... they're probably going to be okay for you despite your issues with arm-mounted weapons... the stubby little CDA arms are only really mobile enough to improve your aim up and down. My 2B build is very similar... I have a 325 XL  (and FF and Endo Steel along with DHS) in that one so it goes 131.6 though, and instead of the 5ML + TAG I have 4 ML + 1 SL.

 

For the 3M, I always liked a 300 XL, 4 SL, 1 LB-10X, but that was before the ECM. You could still run that along with the ECM if you're willing to slow down (the extra mass can be made up by taking a smaller engine), but I like the speed in CDAs. I decided to try a LL in this build... 1 LL, 2 ML, 1 SL, 300 XL. Like I said, learn to love the laser :)

Mon, 01/07/2013 - 13:08
Cynfire's picture
Offline
Last seen: 7 years 2 months ago
Joined: 10/20/2012 - 12:13

Thanks for the info dude!!

Think I will get the 2A next. Should be fun.

Join our Universe

Connect with 2o2p